城市场景结构感知的网格模型简化算法     

张春森  张会  郭丙轩  彭哲 《测绘学报》2020,49(3):334-342

针对二次误差测度(QEM)网格简化算法全局几何特征信息损失严重的缺点,提出一种具有结构感知功能面向城市三维模型重建的网格简化算法。该算法顾及城市影像中平面结构特征,以代理平面为全局特征约束条件,使模型在简化过程中全局结构特征更多地被保持,以利于多层次细节模型(LOD技术)、网格优化提速等模型后续操作。以倾斜摄影获取影像生成的初始三角网格模型为试验数据,采用所给算法对其进行网格简化并与QEM算法进行对比。结果表明:所给算法简化精度及简化效率均优于QEM算法。  相似文献   

Talus slope geomorphology investigated at multiple time scales from high-resolution topographic surveys and historical aerial photographs (Sanetsch Pass,Switzerland)     

Hanne Hendrickx  Lars De Sloover  Cornelis Stal  Reynald Delaloye  Jan Nyssen  Amaury Frankl 《地球表面变化过程与地形》2020,45(14):3653-3669

Talus slopes are common places for debris storage in high-mountain environments and form an important step in the alpine sediment cascade. To understand slope instabilities and sediment transfers, detailed investigations of talus slope geomorphology are needed. Therefore, this study presents a detailed analysis of a talus slope on Col du Sanetsch (Swiss Alps), which is investigated at multiple time scales using high-resolution topographic (HRT) surveys and historical aerial photographs. HRT surveys were collected during three consecutive summers (2017–2019), using uncrewed aerial vehicle (UAV) and terrestrial laser scanning (TLS) measurements. To date, very few studies exist that use HRT methods on talus slopes, especially to the extent of our study area (2 km²). Data acquisition from ground control and in situ field observations is challenging on a talus slope due to the steep terrain (30–37°) and high surface roughness. This results in a poor spatial distribution of ground control points (GCPs), causing unwanted deformation of up to 2 m in the gathered UAV-derived HRT data. The co-alignment of UAV imagery from different survey dates improved this deformation significantly, as validated by the TLS data. Sediment transfer is dominated by small-scale but widespread snow push processes. Pre-existing debris flow channels are prone to erosion and redeposition of material within the channel. A debris flow event of high magnitude occurred in the summer of 2019, as a result of several convective thunderstorms. While low-magnitude (<5,000 m³) debris flow events are frequent throughout the historical record with a return period of 10–20 years, this 2019 event exceeded all historical debris flow events since 1946 in both extent and volume. Future climate predictions show an increase of such intense precipitation events in the region, potentially altering the frequency of debris flows in the study area and changing the dominant geomorphic process which are active on such talus slopes. © 2020 John Wiley & Sons, Ltd.  相似文献   

Using visibility analysis to improve point density and processing time of SfM-MVS techniques for 3D reconstruction of landforms     

Álvaro Gómez-Gutiérrez  Trent Biggs  Napoleon Gudino-Elizondo  Paz Errea  Esteban Alonso-González  Estela Nadal Romero  José Juan de Sanjosé Blasco 《地球表面变化过程与地形》2020,45(11):2524-2539

Image network geometry, including the number and orientation of images, impacts the error, coverage, and processing time of 3D terrain mapping performed using structure-from-motion and multiview-stereo (SfM-MVS). Few studies have quantified trade-offs in error and processing time or ways to optimize image acquisition in diverse topographic conditions. Here, we determine suitable camera locations for image acquisition by minimizing the occlusion produced by topography. Viewshed analysis is used to select the suitable images, which requires a preliminary digital elevation model (DEM), potential camera locations, and sensor parameters. One aerial and two ground-based image collections were used to analyse differences between SfM-MVS models produced using: (1) all available images (ALL); (2) images selected using conventional methods (CON); and (3) images selected using the viewshed analysis (VIEW). The resulting models were compared with benchmark point clouds acquired by a terrestrial laser scanner (TLS) and TLS-derived DEMs. The VIEW datasets produced denser point clouds (28–32% more points) and DEMs with up to 66% reduction in error compared with CON datasets due to reduction of gaps in the DEM. VIEW datasets reduced processing time by 37–76% compared with ALL, with no reduction in coverage or increase in error. DEMs produced with ALL and VIEW datasets had similar slope and roughness, while slight differences that may be locally important were observed for the CON dataset. The new method helps optimize SfM-MVS image collection strategies that significantly reduce the number of images required with minimal loss in coverage or accuracy over complex surfaces. © 2020 John Wiley & Sons, Ltd.  相似文献   

一种旋转塑性势面模型及非关联塑性流动法则     

徐日庆  蒋佳琪  冯苏阳  鞠露莹 《岩土力学》2020,41(5):1474-1482

为了较好地描述软土塑性应变发展规律，提出了一种改进的塑性流动模型。该模型采用了与屈服函数形式相同，但具有一定倾角 的塑性势函数。土体在变形过程中，塑性流动方向会依赖于塑性势面的旋转而变化，直至达到破坏状态。通过对常规三轴试验结果的分析可以发现：在剪切过程中，塑性势面旋转角的初值 与终值 较为稳定，不受围压变化影响。在此试验观察基础上，引入了归一化的旋转角参数 以及描述土体应力状态的参数 ，在采用蛋形势函数的情况下二者具有良好的分段线性关系。利用该关系，建立了改进的塑性流动法则，只需要2个额外的模型参数。对所提出的塑性流动模型进行了验证，计算结果表明该模型能较好地反映塑性应变的变化趋势。  相似文献   

新疆库尔勒市道路积尘重金属污染及健康风险评价     

阿地拉&#;艾来提  麦麦提吐尔逊&#;艾则孜  靳万贵  姑力巴努&#;艾尼  艾尼瓦尔&#;买买提  阿里木江&#;卡斯木 《中国地质》2020,47(6):1915-1925

为探究绿洲城市道路积尘重金属污染风险，在新疆库尔勒市采集54个代表性道路积尘样品，分析其中Hg、Cd、As、Pb、Cr和Cu等6种元素含量，基于GIS技术与地学统计法，采用污染负荷指数法和US EPA健康风险评价模型，对道路积尘中重金属污染及潜在健康风险进行评价。结果表明：库尔勒市道路积尘中Hg、Cd、As、Pb和Cu等元素含量的平均值均小于土壤环境质量—建设用地土壤污染风险管控标准（GB 36600—2018）中的筛选值，但Cr元素含量平均值为相应筛选值的9.90倍。污染评价结果表明，研究区道路积尘中Cr呈现重度污染，Hg、Cd、As、Pb和Cu呈无污染。道路积尘中重金属元素的污染负荷指数介于0.0142~0.0522，平均值为0.0266，处于无污染水平。从道路积尘重金属污染空间分布格局来看，库尔勒市东北部和北部区域出现污染高值区。健康风险评估结果表明，经手-口摄入途径是库尔勒市道路积尘重金属日均暴露量及健康风险的主要途径，儿童受到的健康风险高于成人。库尔勒市道路积尘中Hg、Cd、As、Pb、Cr与Cu等元素的非致癌风险及致癌风险处于安全范围内，As对非致癌风险的贡献最大，Cr对致癌风险的贡献最大。  相似文献   

中国东北及邻区竖直向地震动强度包络函数参数的确定及其衰减关系     

张美玲  张天雷  杜秋男  张永刚  王建勋  高东辉 《地震地磁观测与研究》2020,41(4):11-17

选用2008—2019年中国东北及邻区27次地震竖直向105条强震动记录，以三段式强度包络函数模型为目标，利用加权最小二乘回归方法，尝试建立了东北及邻区竖直向地震动时程强度包络函数参数的衰减公式，以使我国的地震动区域划分更具有普遍性。同以往的研究类似，上升段持时t₁和平稳段持时t_s的确定方法采用了70%能量持时法。所选地震的震级为3.3—5.8级，最大震中距为371 km。基于土层场地的竖直向记录，通过与我国目前常用的时程强度包络函数参数的衰减关系进行对比分析发现，t₁与震级之间有明显的相关性，实际应用中应考虑震级对t₁的影响；地震整体持时较短造成t_s上升趋势随距离的增加而变缓；下降段由衰减系数c的变化可见，记录整体衰减较快。  相似文献   

小尺度网格层析速度建模方法在低幅构造区时深转换中的应用     

吕振宇  魏鹏 《地球物理学进展》2020,(1):339-344

渤海M油田区浅层多发育低幅构造,低幅构造区的地震数据对常规层析成像不够敏感,导致常规速度反演方法很难保证低幅构造速度建模的准确性,从而给时深转换工作带来较大误差.本文提出一种小尺度网格层析速度建模方法,该方法基于低幅构造的薄层信息,在有薄层信息的地层加密网格分布,从而实现根据地质条件划分网格的策略,进而通过解析矩阵方程实现速度模型的迭代更新.通过实际数据应用证明,对于渤海M油田利用本文提出的高精度网格层析速度建模方法是有效可行的,该方法能够有效提高低幅构造区速度建模的精度,利用该方法得到的速度模型能够大幅提高时深转换的精度,从而指导构造解释及成图工作.  相似文献   

水动力条件对沉积物-水界面氧通量的影响   总被引：2，自引：0，他引：2  

郑阳华  邹浩东  何强  李宏  张青  陈德敏  艾海男 《湖泊科学》2018,30(6):1552-1559

氧环境决定了水体沉积物中各种生命所需元素的最终归趋，沉积物-水界面是水相与沉积物相氧传递的重要场所，而水动力条件是影响沉积物-水界面氧传递的重要因素.选择三峡库区一级支流御临河为研究对象，根据长年监测数据建立实验室模型，采用声学多普勒流速测试仪及微电极测试系统构建了非侵入式涡度相关测试系统，探究了不同水动力条件对沉积物-水界面氧通量的影响.结果表明：水体静止状态下沉积物-水界面溶解氧浓度随时间的增加而减少，非静止状态下随时间的增加而增加；沉积物-水界面氧通量随水体流速的增加而增加.根据氧通量求解对应流速下垂直涡动扩散系数并进行线性拟合，当水体流速为0.01~0.14 m/s时，垂直涡动扩散系数与水体流速的相关性最好，此时沉积物-水界面氧通量的传递以涡动扩散为主导.  相似文献   

2016年秋季热带西太平洋网采浮游植物群落结构   总被引：1，自引：0，他引：1  

陈卓  孙军  张桂成 《海洋科学》2018,42(7):114-130

作者于2016年9月27日～10月25日对热带西太平洋(0°～20°N, 120°～130°E)10个站位的网采浮游植物群落结构进行了采样调查。应用Uterm?hl方法对调查海域浮游植物的物种组成、细胞丰度、优势物种以及群落多样性等相关生态特征进行了分析。希望为热带西太平洋提供一些基础的背景资料,为以后的研究奠定基础。结果表明, 鉴定出浮游植物共计4门、66属、243种(包括变种、变型), 含硅藻门(Bacillariophyta)34属、103种, 甲藻门(Pyrrophyta)28属、133种, 金藻门(Chrysophyta)2属、4种,蓝藻门(Cyanophyta)2属、3种。浮游植物细胞丰度1 965.573×10³ 细胞/m³ , 其中蓝藻的细胞丰度为1 945.169×10³ 细胞/m³ , 决定了浮游植物的分布格局, 占总细胞丰度的98.96%, 高值区分布在0°N130°E-10°N130°E的4个站位(E130-13、E130-15、E130-17、E130-19); 硅藻丰度在20°N断面N20-4站位存在高值区; 甲藻丰度在130°E断面的3个站位(E130-10、E130-13、E130-15)存在高值区。本次调查的优势种依次为铁氏束毛藻(Trichodesmium thiebaultii)、扁形原甲藻(Prorocentrum compressum)、扁豆原甲藻(Prorocentrum leniculatum)、胞内植生藻(Richelia intracellularis)、菱形海线藻(Thalassionema nitzschioides)、细弱海链藻(Thalassiosira subtilis)、具边线形圆筛藻(Coscinodiscus marginato-lineatus)、科氏角藻(Ceratium kofoidii)、鲁比膝沟藻(Gonyaulax lurbynaii)、中华半管藻(Hemiaulus sinensis)、霍氏半管藻(Hemiaulus hauckii)、小等刺硅鞭藻(Dictyocha fibula)。Shannon-Weiner多样性指数的均值为2.440,Pielou 均匀度指数的均值为0.163。相关分析结果显示浮游植物空间分布主要受PO₄-P、NH₄-N的影响,且由蓝藻的相关性决定的。聚类分析得出群落结构分为大洋群聚和近岸群聚两种类型(其中大洋群聚的站位又划分为0°～10°N纬度范围聚集和10°～20°N纬度范围聚集)。  相似文献   

Numerical study of sand scour with a modified Eulerian model based on incipient motion theory     

Qingqing Yuan  Min Zhao  Tong Ge 《Marine Georesources & Geotechnology》2018,36(7):818-826

Application of the standard Eulerian model to simulations of sand scour results in unrealistic phenomena. Therefore, the present work develops a modified Eulerian model based on sand incipient motion theory. The modified model is applied for simulating a two-dimensional single vertical jet and a moving planar jet. The simulation results generally demonstrate fairly good agreement with published results of scour profiles and the velocity contours of the water and sand phases. In addition, equations to describe self-similar scour profiles for the moving planar jet cases are given. The results demonstrate that the modified model efficiently and accurately simulates the two-dimensional sand scour produced by jets, particularly for the moving jet cases.  相似文献